JJ plastalloy pvt.ltd
A-2 , Badshah bagh colony, maldahiya, varnasi- 221002 ( u.p ).india Varanasi
India

Home

Our Products

We have a wide range of PE Based compound as per specific requirements and needs of the customers. This consist of Flame Retardant Compound for Extrusion and other application

TALC MASTERBATCHES

SIVATHENE T-Aid is Talc filled LLDPE Based master batch, and developed for Lamination of Woven Sacks Bag and other products by applying the reinforcing properties of ultrafine Talc & carrier resin with higher M.F.I. to provide the better mechanical properties to the product/article. Sivathene T-Aid has got very high brightness and clarity. Even with higher dosage it does not impart opacity to thin films or articles. Also it acts as an Antiblock Agent.

SIVA ANTIOXIDANT MASTERBATCHES

Antioxidants are used to protect polymers from degradation, both during processing (short term stabilization) and during use (long term stabilization). Polymer degradation generally results in gel formation and changing melt flow index, loss of mechanical and a esthetical properties (crazing, gloss reduction, chalking), and discoloration. Plastics generally ages rapidly under the effects of light, oxygen and heat leading to:Loss of strength, stiffness of flexibilityDiscolorationScratching and lo ...

UV MASTERBATCHES

UV Masterbatches Manufacturer - Plastics are sensitive to degradation by UV light and must be therefore protected when exposed to solar radiation. The extent and rate of this degradation is influenced by various parameters such as, for example, climatic conditions, and thickness of the part, polymer type or the presence of other additives.APPLICATIONS FOR SIVACOM UV MASTERBATCHESUV Masterbatches protects the polymers against UV-degradation, avoid discolouration and improves the processibility. U ...

SLIP MASTERBATCHES

JJ Plastalloy Slip Masterbatches Manufacturer in Inida, Siva Slip Masterbatches is used to reduce the coefficient of friction (COF) and to improve the surface finishing of products. The amount of slip agent must be reduced as the thickness of film with maintains the same COF. Small amounts of slip additives not only enhance the "hand" of film, but also aid in process ability. It can be effective in enhancing mold release properties. It has been recommended for the film, sheet, injection Moulding ...

POLYMER PROCESSING AID MASTERBATCHES

Polymer Process Aids masterbatches (PPA Masterbatches) are specifically designed to enhance extrusion ability of plastics (PE Films, pipes, tubes...) leading to improved productivity and quality improvement. These are fluoro-polymer based additive masterbatches, which are properly dispersed in a poly-olefin polymer. These masterbatches helps in improving the processing of poly-olefins (LLDPE, HDPE etc.) and particularly in blown film extrusion. Normally there is a common practice to process at h ...

OPTICAL BRIGHTENER MASTERBATCHES

JJ Plastalloy Manufacturer and Exporter of Optical brightener in india, Optical brightener additive is also called Fluorescent Whitening agents. These Masterbatches are added in polymers to reduce yellowing, improved whiteness, and to enhance the brightness of a product. These Masterbatches work via a fluorescent mechanism which absorbs light in the UV spectrum and emits light in the blue region of visible spectrum to yield a brighter and fresher appearance.The tendency of many Plastic materia ...

DESICCANT MASTERBATCHES

SIVA desiccant masterbatches can counter a problem which develop during the processing of plastics due to the presence of moisture and prevents adsorption of moisture during transportation. Moisture can be present in raw materials such as hygroscopic polymers, fillers and pigments. Reprocess polymer can also have high moisture content. When processing polymer with high moisture content the polymer can become porous and show voids/lower tensile in the final articles or extruded/blown sheet. In fi ...

ANTISTATIC MASTERBATCHES

Sivathene Antistatic Masterbatches is used as an antistatic agent to reduce the electrical resistance on the surface of films or sheets and also a lubricating effect in injection molding. It used in multilayer films for reduce the electrical resistance to provide the better properties.

ANTISLIP MASTERBATCHES

SIVA Antislip-Masterbatches roughen up the surface of films with not dispersed polymer particles to result in an anti-skid surface (This masterbatch creates a natural rough non-slip surface to films or sheets after production) Antislip effect is a great advantage to manufacturers of bags which provides a roughThe product consists of abrasive particles with special additives embedded into a tough polymer backing. The reverse side is coated with a thick layer, covered by a removable protective lin ...

ANTIFOG MASTERBATCHES

“Fogging “in plastic films refers to condensation of water vapor on the surface in the form of small discrete droplets, which results from differences in surface tension between the water droplet and the polymer surface. Fogging may occur as a result of either a drop in temperature on the inside surface of the film below the dew-point of the enclosed air/water vapor mixture (“cold fogging”), or by cooling of the air near the film to a temperature at which it can no longer retain all the ...

ANTIBLOCK MASTERBATCHES

In all kind of plastic films for flexible packaging and industrial applications, antiblocking properties are very important for further handling and converting. Plastic layers tend to stick together. The addition of an antiblocking agent creates space between two plastic layers (surface roughness) preventing so-called blocking. Mostly anti blocking agents are used in multilayer structure films in order to have the highest benefit.Blocking is the adhesion of two adjacent layers of film. It is a ...

Video Gallery

Our Activities

JJ Plastalloy and all its members are firmly committed to cater consistent products to customers at the right price. Our beliefs and commitments to deliver Quality, Cost and Delivery (QCD) to all our clients are very very high.In order to meet our commitments towards QCD, very strictly we follow the practices of Good Manufacturing System (GMP), KAIZEN. These are not just a few words for us. These are the drivers that always keep each and everyone of us on our toes to improve continuously.With continuous training, awareness and attention of our members, we continuously keep doing small improvements in our manufacturing process so as to meet our objectives towards QCD aspects.Total Employee Involvement is something that channelizes our positive energy for continuous improvement. Continuous training, appraisal, award, reward, recognition and various other human philosophies keep everyone of us charged to deliver the overall objective of our organization, which is Customer Satisfaction.

Product Categories

Catalogue

Our Management Team

Certificates

Location
Varanasi

Year Established

Business Type
Manufacturer Exporter

Turn over
US$ NA

Employees
500

Main Markets
India

▲

Replied Date	:
Replied from	:
Replied from Company	:
Address	:
Telephone No.	:
Mobile No.	:

Phone number	Fax Number
Address	Contact Person
This Business is Closed / No More Exists

Download the app

About Us

Our Policies

Follow Us

Contact South Africa Yellow Pages Online

	SOUTH AFRICA YELLOW PAGESONLINE
	Global site for local search