THIS PRODUCTS COMES WITH SERVICE FROM USECOCOOL MK 6 is mineral oil-based, water-miscible cutting fluid which mixes easily and forms a stable emulsion. ECOCOOL MK 6 is free of secondary amines and thus conforms to German TRGS 611.
Application
ECOCOOL MK 6 is recommended for the precision machining of common materials, e.g. aluminium and steel.Recommended concentrations:
Normal machining 8 – 10 %Difficult machining 10 – 15 %
Benefits
- Low foaming
- Allow high cutting performance
- Free of chlorine, zinc and heavy metals
- Tried and tested formulations
- Good wetting and flushing performance
- Universal application in central systems and individually-filled machines
Typical chemical and physical properties
| Property | Unit | Data | Test method |
| | | |
| Density at 15 °C | g/ml | 0.920 | DIN 51 757 |
| Kinematic viscosity at 40 °C | mm²/s | 50 | DIN 51 562-1 |
| Total oil content | % | 70 | |
| Corrosion test emulsion > 7 % | degree of corrosion | 0 – 0 | DIN 51 360-2 |
| pH value, 2 % emulsion | | 9.4 | DIN 51 369 |
| Handheld refractometer factor ( Testroe) | | 1.0 | FLV-T 5 *) |
FLV = Test procedure of FUCHS EUROPE SCHMIERSTOFFE GMBH
Application concentration:
To ensure the optimum corrosion protection and lifetime of the emulsion, we recommend a concen- tration of at least 7.5 %. However, the ultimate concentration must also be compatible with the materials involved and the machining operation.
Mixing temperature:
The optimum mixing temperature for water and concentrate is 15 - 20 °C.
Our Application Engineers will be pleased to advise you regarding specific applications.
Changes in the colour of the water-miscible cutting fluid concentrate have no detrimental effect on the quality or the performance of the product.
As regards application, please observe current German VDI-Guidelines 3035, 3397 Sections 1 - 3 for perfect results.
Storage conditions: Protect from frost!
MINERAL WATER BASED CUTTING OIL.
